&width=400&height=569)
Untitled (123.9)
8.27 x 11.69 inch
Mixed Media on Transparency OHP Film
Untitled
Marker pen, Acrylic, Spray paint, letter transfer
Views: 24
Albums: LMM Shared Works
Comment
-
Comment by Darwin Sy Antipolo on December 2, 2011 at 9:53am -
thanks ann for the kind words! appreciate it.
this one and some other pieces go into our company's annual charity event. i hope we raise good money. :D
-
Comment by Ann Hawke on December 2, 2011 at 3:32am -
very different, love the mediums you're using to create this.
-
Comment by Darwin Sy Antipolo on October 10, 2011 at 9:10pm
-
thanks mike. just playing with the materials... and a different (reverse) thinking on doing the artwork. cheers!
-
Comment by Mike Tann on October 10, 2011 at 5:47am -
I can see you are getting into these, I like this one best.
-
Comment by Darwin Sy Antipolo on October 9, 2011 at 11:43pm
-
Thank lee ann!
-
Comment by Lola Irizarry on October 9, 2011 at 2:58am -
wow
Badge
Birthdays
Birthdays Today
Birthdays Tomorrow
Music
HERE ARE 2 LINKS to TWO of my youtube videos talking and demonstrating about this amazing product:
http://www.youtube.com/watch?v=HIc02QBihJQ&feature=share&list=UUM6N5AOYoyg6eAkbcDWpNFg
http://www.youtube.com/watch?v=6zAPZn5TEyM&list=UUM6N5AOYoyg6eAkbcDWpNFg&index=41
So once i have my image printed onto transparency film, I take my Ezscreen silk screen which has been coated in light sensitive emulsion (These sheets come pre-coated so they are ready to use). Place it onto a black board, then place the transparency image on top (this part needs to be done in a dark room with no direct sunlight). I take it outside and expose it for 1 minute and 40 seconds (but time varies depending on time of day and strength of sunlight). After i have exposed the image i place it into a tub of water for around 5 - 8 minutes. Then i rinse the screen out under fast running water until the unexposed area (the black) washes away. I then expose the screen to the sun for a further 20mins to completely harden the light sensitive emulsion.
And this is the completed screen ready for printing. I simply use an old credit card to spread the ink over the screen making sure i do one complete full stroke across the screen (holding the credit card at a 45 degree angle). I immediately wash the screen out under fast flowing water and pat dry. I use fabric screen printing ink which washes out in water (which makes the process easy).
I love this product, their website is http://ezscreenprint.com/ (for full instructions and details on how to purchase this awesome product).
© 2013 Created by Greef.
You need to be a member of Loving Mixed Media to add comments!
Join Loving Mixed Media