Small works on paper.
From a series of small works on paper. I started out doing some drawings on paper with water soluble pencil and ended up moving to a small syringe tip squeeze bottle with thinned black paint. From there it was basically an exercise of drawing, blocking out certain areas, drawing some more, etc. At first I was just working with black and white, but soon started bringing in color. One of the cool things I started doing was using a vegetable scrubbing brush to break up the black lines, while adding some texture and keeping them from looking too literal. Basically, I would draw with the black paint, and while it was still wet, I would give it a slight mist with the spray bottle and then go back over the area with the vegetable brush, which is sort of an equivalent to a plastic wire brush, following the lines that were just laid down. Long winded description, but an interesting effect.
Comment
Badge
Birthdays
Birthdays Today
Birthdays Tomorrow
Music
HERE ARE 2 LINKS to TWO of my youtube videos talking and demonstrating about this amazing product:
http://www.youtube.com/watch?v=HIc02QBihJQ&feature=share&list=UUM6N5AOYoyg6eAkbcDWpNFg
http://www.youtube.com/watch?v=6zAPZn5TEyM&list=UUM6N5AOYoyg6eAkbcDWpNFg&index=41
So once i have my image printed onto transparency film, I take my Ezscreen silk screen which has been coated in light sensitive emulsion (These sheets come pre-coated so they are ready to use). Place it onto a black board, then place the transparency image on top (this part needs to be done in a dark room with no direct sunlight). I take it outside and expose it for 1 minute and 40 seconds (but time varies depending on time of day and strength of sunlight). After i have exposed the image i place it into a tub of water for around 5 - 8 minutes. Then i rinse the screen out under fast running water until the unexposed area (the black) washes away. I then expose the screen to the sun for a further 20mins to completely harden the light sensitive emulsion.
And this is the completed screen ready for printing. I simply use an old credit card to spread the ink over the screen making sure i do one complete full stroke across the screen (holding the credit card at a 45 degree angle). I immediately wash the screen out under fast flowing water and pat dry. I use fabric screen printing ink which washes out in water (which makes the process easy).
I love this product, their website is http://ezscreenprint.com/ (for full instructions and details on how to purchase this awesome product).
© 2013 Created by Greef.
You need to be a member of Loving Mixed Media to add comments!
Join Loving Mixed Media