I found a book the ither day that had all these ideas for making image transfers some of which i have tried.

so here goes a list of things that can be used to make image transfers.

Lighter fuel for magazine transfers Naz Dar Trans(silkscreen suppliers)

Oil of wintergreen( i have used this and it gives a lovely soft image. Be prepared though it has a very strong smell. Chinese medicine for lumbago and has that mentholly smell.. i liked it)

Oil of Lavender

Fabric spot remover (this makes sense)

Lighter fluid

Lacquer thinner

Gum Turpentine( I have used this a lot and i love the look it gives very soft image, again a bit smelly and also toxic if not used correctly)

 

Views: 264

Reply to This

Replies to This Discussion

Thanks for sharing this information Mo - will come in handy!
What's the name of the book?

it was a photogrpahic book that dealt with experimental techniques. I picked it up because i have just got a polaroid land camera and it had info about polaroid transfers and lifts. But the rest of the book was a too much photo stuff i didnt want. So i sat down and wrote out the bits about image transfer. Our Borders shop is closing down adn getting rid of all stock. If they knock it down a bit more i might still buy it but it was $75 so a bit too much really.

I am looking at buying this book which I beleive is very good

'Image Transfer Workshop: Mixed-Media Techniques for Successful Transfers by darlene McElroy and sandra duran wilson.'

found it on amazon

Thanks 

 

I, thought that you had a recent mixed media book and that is why I asked. I am interested in buying such a book.

I once came across a photographic site that mentioned some of the materials that you did. I can't find the link but I remember that peppermint oil and normal Turpentine were included. I have no idea what Gum Turpentine is?

i have this book mo and am about to write a review. There isn't that much that you probably have NOT tried.

 

Here's a link to an out of print list http://used.addall.com/SuperRare/submitRare.cgi?author=&title=&...

 

Now that is cheaper!!!!!

 

Thanks Mo.

Anybody ever try finger nail polish remover?

I did, unsuccessfully.  

I used an inkjet image and some polish but it just came out a blurry mess. I, think that this method works best with a toner based image (?) or photocopies, not inkjet.

It worked well or meusing inkjet and gloss photopaper

Lee

I actuly got Windex to work for an inkjet transfer.

RSS

Badge

Loading…

Music

Loading…

HERE ARE 2 LINKS to TWO of my youtube videos talking and demonstrating about this amazing product:

http://www.youtube.com/watch?v=HIc02QBihJQ&feature=share&list=UUM6N5AOYoyg6eAkbcDWpNFg

http://www.youtube.com/watch?v=6zAPZn5TEyM&list=UUM6N5AOYoyg6eAkbcDWpNFg&index=41

So once i have my image printed onto transparency film, I take my Ezscreen silk screen which has been coated in light sensitive emulsion (These sheets come pre-coated so they are ready to use). Place it onto a black board, then place the transparency image on top (this part needs to be done in a dark room with no direct sunlight). I take it outside and expose it for 1 minute and 40 seconds (but time varies depending on time of day and strength of sunlight). After i have exposed the image i place it into a tub of water for around 5 - 8 minutes. Then i rinse the screen out under fast running water until the unexposed area (the black) washes away. I then expose the screen to the sun for a further 20mins to completely harden the light sensitive emulsion. 

And this is the completed screen ready for printing.  I simply use an old credit card to spread the ink over the screen making sure i do one complete full stroke across the screen (holding the credit card at a 45 degree angle). I immediately wash the screen out under fast flowing water and pat dry. I use fabric screen printing ink which washes out in water (which makes the process easy).

I love this product, their website is http://ezscreenprint.com/ (for full instructions and details on how to purchase this awesome product).

© 2013   Created by Greef.

Badges  |  Report an Issue  |  Terms of Service

Feedback scroll to the top Skysa Website Social Bar /* inserts buttons below status update */