Tags:
Permalink Reply by Bronwyn Palmer on June 2, 2011 at 4:41pm
Permalink Reply by Grant Dowling on June 3, 2011 at 12:45am
Permalink Reply by Darwin Sy Antipolo on June 2, 2011 at 5:43pm hi grant, this is how elke described it to me.. snagged it all. hope it helps.
"Sorry fibrite is the french brandname for this wall paste,in German it's even more bizarre,Tapetenstrukturfarbe!Well,unless you do speak my language you will make sense out of it but you have to go into a specialized paintshop for professionals ti ask about an interior wallpaste which gets painted and waxed afterwards. It's" the" thing for homedecorating in the moment!Hope you can find it!If not go for those small tube and have try out,holfiller,jointglue,some stuff comes in powder as well and you can mix it to have the right consistency,not to runny,not to dry and if you want to print into it,you better wet the item first to avoid it being stuck as it can pull off the paste .Need to experience but it's a hell of a lot of fun!Hope it helps and excuse me of answering so late but come back to me if you need to,happy creating,love,Elke"
Permalink Reply by Grant Dowling on June 2, 2011 at 5:48pm
Permalink Reply by Grant Dowling on June 3, 2011 at 6:56pm The mysterious fibrite is simply paper-mâché but
sorry guys,i can't explain it better as it's not an easy thing to describe. It's less brittle than putty,much more lightweight,a bit sticky,elsatic,so it doesn't crack but it can't be sanded down which is a disadvantage!It's non- toxic,non-smelling and not agressive to your skin.I would try a specialized paintshop and get them to show you all the indoor products to decorate your wall. It's handy if you don't want to put up wallpaper but like to have an uneaven surface which you either leave white or paint , wax and polish in the end to protect the wall and give it a shine...
yes, German is quite a strange language ....
Sounds like Venetian plaster to me. It can be waxed and polished.
Permalink Reply by Grant Dowling on June 3, 2011 at 6:55pm thanks Mo
Permalink Reply by Deb Cragan on June 3, 2011 at 2:32pm
Permalink Reply by Grant Dowling on June 3, 2011 at 6:55pm
Permalink Reply by Grant Dowling on June 3, 2011 at 7:13pm HERE ARE 2 LINKS to TWO of my youtube videos talking and demonstrating about this amazing product:
http://www.youtube.com/watch?v=HIc02QBihJQ&feature=share&list=UUM6N5AOYoyg6eAkbcDWpNFg
http://www.youtube.com/watch?v=6zAPZn5TEyM&list=UUM6N5AOYoyg6eAkbcDWpNFg&index=41
So once i have my image printed onto transparency film, I take my Ezscreen silk screen which has been coated in light sensitive emulsion (These sheets come pre-coated so they are ready to use). Place it onto a black board, then place the transparency image on top (this part needs to be done in a dark room with no direct sunlight). I take it outside and expose it for 1 minute and 40 seconds (but time varies depending on time of day and strength of sunlight). After i have exposed the image i place it into a tub of water for around 5 - 8 minutes. Then i rinse the screen out under fast running water until the unexposed area (the black) washes away. I then expose the screen to the sun for a further 20mins to completely harden the light sensitive emulsion.
And this is the completed screen ready for printing. I simply use an old credit card to spread the ink over the screen making sure i do one complete full stroke across the screen (holding the credit card at a 45 degree angle). I immediately wash the screen out under fast flowing water and pat dry. I use fabric screen printing ink which washes out in water (which makes the process easy).

I love this product, their website is http://ezscreenprint.com/ (for full instructions and details on how to purchase this awesome product).
© 2013 Created by Greef.
Skysa Website Social Bar