So once i have my image printed onto transparency film, I take my Ezscreen silk screen which has been coated in light sensitive emulsion (These sheets come pre-coated so they are ready to use). Place it onto a black board, then place the transparency image on top (this part needs to be done in a dark room with no direct sunlight). I take it outside and expose it for 1 minute and 40 seconds (but time varies depending on time of day and strength of sunlight). After i have exposed the image i place it into a tub of water for around 5 - 8 minutes. Then i rinse the screen out under fast running water until the unexposed area (the black) washes away. I then expose the screen to the sun for a further 20mins to completely harden the light sensitive emulsion.
And this is the completed screen ready for printing. I simply use an old credit card to spread the ink over the screen making sure i do one complete full stroke across the screen (holding the credit card at a 45 degree angle). I immediately wash the screen out under fast flowing water and pat dry. I use fabric screen printing ink which washes out in water (which makes the process easy).
I love this product, their website is http://ezscreenprint.com/ (for full instructions and details on how to purchase this awesome product).
Skysa Website Social Bar
/* inserts buttons below status update */
Loving Mixed Media
Reply Deleted
This reply has been deleted. Return to the discussion.
Welcome to
Loving Mixed Media
Sign Up
or Sign In
Or sign in with:
Badge
Get Badge
Birthdays
Birthdays Today
Christina Leahy
Karen Samenow
Leonie Biddle
Linda Pinda
rita maselli
Birthdays Tomorrow
Caroline
Carolyn Tiley
Emilie Barca
Heidi Franscioni
John Kinsland
Karri DeShazo
Mindy Blanchard
Sonalika M
Tania Hetaraka
Tim Flowerday
Music
HERE ARE 2 LINKS to TWO of my youtube videos talking and demonstrating about this amazing product:
http://www.youtube.com/watch?v=HIc02QBihJQ&feature=share&list=UUM6N5AOYoyg6eAkbcDWpNFg
http://www.youtube.com/watch?v=6zAPZn5TEyM&list=UUM6N5AOYoyg6eAkbcDWpNFg&index=41
So once i have my image printed onto transparency film, I take my Ezscreen silk screen which has been coated in light sensitive emulsion (These sheets come pre-coated so they are ready to use). Place it onto a black board, then place the transparency image on top (this part needs to be done in a dark room with no direct sunlight). I take it outside and expose it for 1 minute and 40 seconds (but time varies depending on time of day and strength of sunlight). After i have exposed the image i place it into a tub of water for around 5 - 8 minutes. Then i rinse the screen out under fast running water until the unexposed area (the black) washes away. I then expose the screen to the sun for a further 20mins to completely harden the light sensitive emulsion.
I love this product, their website is http://ezscreenprint.com/ (for full instructions and details on how to purchase this awesome product).
© 2013 Created by Greef.
Badges | Report an Issue | Terms of Service